Delta PLC Query

Automation_Engineer

Member
A
Join Date
Aug 2018
Location
Hyderabad
Posts
1
Hello Everyone,

I'm facing a problem with Delta PLC. Previously i used DVP14SS11r PLC and now i'm trying to download the previous Program from DVP14SS11r to DVP14SS211r. I have changed PLC from SS to SS2 Series.Everything is OK but when it goes to field only the Extension module is working.There is problem in PLC.Can you people please give any solution for my problem??

Shall we not use SS2 series instead of SS series?

or Shall we change the addressing?
 

Similar Topics

M
Delta plc query
Hi All, Currently i have one delta make plc in which i want to add the recipe where below is my requirement. 1.i want to increment the real...
Replies
0
Views
1,062
Mayur118040
M
Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
90
yawin
Y
A
DELTA PLC-COMMGR software
I have downloaded COMMGR 1.15 software on my laptop. After downloading it works. When I stop and start the program again it doesn't work. It is...
Replies
2
Views
145
Alisahib
A
J
beckoff io and delta plc
How i Can connect Delta plc, with Beckoff remote IO cards?
Replies
2
Views
166
jjorge
J
A
Allen Bradley ControlLogix PLC communication with Delta V DCS
Hi Everyone, I am currently trying to communicate ControlLogix PLCs via EtherNet/IP with Delta V DCS. There is a VIM2 card configured for...
Replies
1
Views
269
Ken Roach
Ken Roach
Back
Top Bottom