Hi Folks. I have a problem with an Omron CPM2A High Speed Counter. It had been working well, but the problem is that a program change was downloaded to the PLC and now it appears that the high speed counter function has been lost. I am not where this PLC is at the moment - I was on the phone with a technician who is online with this PLC and we went through the high speed counter settings (in PLC settings) and they appear to be the same settings as they were when I programmed this PLC in the first place. I had him change the settings, transfer them, then change them back to the original and transfer them again but this made no difference. Any thoughts on what else could cause this? Thanks!