Start Different Conveyor Using Timer

kasongomoma · Dec 9, 2005

Can someone help me to write a plc SLC500 program :
THE CONVEYOR NEED TO BE ON FOR ALL CYCLE TO CHECK TIRES OR MAKE
THIS TIRE INSPECTION PROCESS

-START_Push Button.
if start
turn green LED ON
-STOP PB
turn red LED ON
-If start, INCLINE CONVEYOR ON>>> OUTPUT 1
-wait (TON) ...> OUTPUT 1/DN
-CENTER CONVEYOR ON >>>> OUTPUT 2
-wait (TON)....> OUTPUT 2/DN
-BCODE CONVEYOR ON >>>> OUTPUT 3
-wait TON)....> OUTPUT 3/DN
-VISION CONVEYOR ON>>>> OUTPUT 4
-wait (TON) ....> OUTPUT 4/DN
- INSERT A ROUTINE PROGRAM CALL X-RAY
- ACCUMULATOR CONVEYOR
- INSPECTION CONVEYOR
- TAKE AWAY CONVEYOR
- REJECT CONVEYOR
-LOADER CONVEYOR ON >>> OUTPUT 5

Ken Moore · Dec 9, 2005

Post what you've written so far, and we will take a look at it.

Ken

Hydro Power Guy · Dec 9, 2005

You should also explain the process a little more. It appears that you want to use timers instead of sensing product. If this is the case, my experience tells me that you will eventually run into problems as the machine physical condition changes.

kasongomoma · Dec 9, 2005

plc program

My program is save as RSS IN SLC500. I DON'T HOW TO ATTACH THIS FILE BECAUSE IT SAYS INVALID

Rube · Dec 9, 2005

Can you save your .RSS to a PDF? Then you should be able to post it.

Ken Moore · Dec 9, 2005

Either zip the .rss program or just change the extension to .zip, let us know which one you used.

Ken

kasongomoma · Dec 9, 2005

Start Different Conveyor Using Timer

kasongomoma

Member

Ken Moore

Lifetime Supporting Member

Hydro Power Guy

Member

kasongomoma

Member

Rube

Member

Ken Moore

Lifetime Supporting Member

kasongomoma

Member

Similar Topics