Sync 2 motor with FX2N

Zain Bin Azhar

Member
Z
Join Date
Feb 2018
Location
Faisalabad
Posts
2
I am trying to synchronizied two motor using VFD( Encoder feedback) with Mitsubishi FX2n PLC , Master /Slave
but i dont know how plz help me to solve it

Kind Regards
Zain Bin Azhar
 

Similar Topics

O
high current on an async electric motor
Hi, I know this is a plc forum, so this is a bit off-topic. However I know there are lot of smart electrical engineers here, so I will give it a...
Replies
14
Views
3,970
DickDV
D
C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
41
Controller5848
C
B
Studio 5000 - Time Sync Grandmaster Priority - Control Sync and Module Connection Faults
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...
Replies
0
Views
120
Bobcat22
B
A
Different Drivers and motors motion sync in Rockwell Studio 5000
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
Replies
1
Views
204
robertmee
R
B
AOI to sync slave controller clock to master controller clock messaging question
Hello, I am trying to create an AOI that will retrive the clock datetime bits from a master plc through a generic message read instruction and...
Replies
2
Views
487
Contr_Conn
Contr_Conn
Back
Top Bottom