Jasondelane
Lifetime Supporting Member
Hi everyone,
I've got a 1756-L61/B, 19.11, and RSLogix is failing to go online or upload to a new program. I have the program that was created from the aborted upload attached, but the old program that I attempted to go online with is too large. The new program does not list all the modules, which include controlnet, ethernet, hydraulic, DC Input, AC in and out, and two flex i/o in the operator consoles.
The error I'm getting is 806-8004280A, and the entire error log looks like:
Uploading project from controller 'Charles_Ingram_1257_18' into file Charles_Ingram_1257_18.ACD...
Preparing the Database...
Uploading all Data Types...
Uploading all Controller Tags...
Uploading Device, Extended Device, and Memory Objects...
Uploading all Add-On Instructions...
Uploading all Programs...
Uploading program 'MainProgram'
Uploading all 'MainProgram' Tags...
Uploading all 'MainProgram' Routines...
Uploading routine 'STI'
Uploading routine 'SKEW_TARGET'
Uploading routine 'WIDTH_AVG'
Uploading routine 'MMI_SCREENS'
Uploading routine 'SEQUENCERS'
Uploading routine 'LUG_SPEED'
Uploading routine 'MMI_MSGNUM'
Uploading routine 'EDGER_FEED'
Uploading routine 'RESAW'
Uploading routine 'HYD_GRADIENTS'
Uploading routine 'TALLY_DATA'
Uploading routine 'LUG_INLK'
Uploading routine 'TARGET_FETCHERS'
Uploading routine 'LUG_POSITION'
Uploading routine 'FEED_TABLE'
Uploading routine 'OILER_SYSTEMS'
Uploading routine 'HYD_FAULTS'
Uploading routine 'SKEW_INIT'
Uploading routine 'MODE_BITS'
Uploading routine 'SKEW_NEAREND_SECOND'
Uploading routine 'MOTORS'
Uploading routine 'MMI_DISPLAY'
Uploading routine 'MEASURE_SPEED'
Uploading routine 'LUG_DRIVE'
Uploading routine 'INFEED'
Uploading routine 'HYD_HYD100'
Uploading routine 'BIT_SHIFT'
Uploading routine 'PRESSROLLS'
Uploading routine 'WIDTH_COUNTS'
Uploading routine 'MINIMUM_CUT'
Uploading routine 'MISC_ITEMS'
Uploading routine 'MMI_CALIB'
Uploading routine 'PREPOS_DN'
Uploading routine 'HYD_JOG'
Uploading routine 'OFFSETS'
Uploading routine 'MAIN_ROUTINE'
Uploading routine 'FETCHER_OVERRIDE'
Uploading routine 'WIDEST_EYE'
Uploading routine 'HYD_MAIN'
Uploading routine 'CHANGE_SAWS'
Uploading routine 'MMI_MSGDET'
Uploading routine 'FETCH_HOME'
Uploading routine 'OPTIMIZER_DATA'
Uploading routine 'CAL_FAIL'
Uploading routine 'EDGER_INIT'
Uploading routine 'GRAPH_GAP'
Uploading routine 'MMI_OVERRIDES'
Uploading routine 'MMI_STATUS'
Uploading routine 'RESAW_DIVERTER'
Uploading routine 'BOARDS_ONE'
Uploading routine 'NEXT_BOARD'
Uploading routine 'HYD_POSITION'
Uploading routine 'SKEW_FAREND_FIRST'
Uploading routine 'HYD_CONTROLS'
Uploading routine 'PREPOS_UP'
Uploading routine 'TARGET_SAWS'
Uploading routine 'SKEW_END'
Uploading routine 'HYD_CALIB'
Uploading routine 'ELECTROCAM'
Uploading all Modules...
Error: No port was found with the given port number.
Error: Failed to upload modules.
Complete - 2 error(s), 0 warning(s)
It will tell me that RSLogix is being taken offline, and thats it.
I did notice that the old program has the controller revision as 19.52, which is different than what's coming up when I try to do an upload to a new program.
Any ideas on the steps I should take? I can't take the machine offline during the day, but we may be able to do it tonight. Do you think it'll upload in Program mode?
I've got a 1756-L61/B, 19.11, and RSLogix is failing to go online or upload to a new program. I have the program that was created from the aborted upload attached, but the old program that I attempted to go online with is too large. The new program does not list all the modules, which include controlnet, ethernet, hydraulic, DC Input, AC in and out, and two flex i/o in the operator consoles.
The error I'm getting is 806-8004280A, and the entire error log looks like:
Uploading project from controller 'Charles_Ingram_1257_18' into file Charles_Ingram_1257_18.ACD...
Preparing the Database...
Uploading all Data Types...
Uploading all Controller Tags...
Uploading Device, Extended Device, and Memory Objects...
Uploading all Add-On Instructions...
Uploading all Programs...
Uploading program 'MainProgram'
Uploading all 'MainProgram' Tags...
Uploading all 'MainProgram' Routines...
Uploading routine 'STI'
Uploading routine 'SKEW_TARGET'
Uploading routine 'WIDTH_AVG'
Uploading routine 'MMI_SCREENS'
Uploading routine 'SEQUENCERS'
Uploading routine 'LUG_SPEED'
Uploading routine 'MMI_MSGNUM'
Uploading routine 'EDGER_FEED'
Uploading routine 'RESAW'
Uploading routine 'HYD_GRADIENTS'
Uploading routine 'TALLY_DATA'
Uploading routine 'LUG_INLK'
Uploading routine 'TARGET_FETCHERS'
Uploading routine 'LUG_POSITION'
Uploading routine 'FEED_TABLE'
Uploading routine 'OILER_SYSTEMS'
Uploading routine 'HYD_FAULTS'
Uploading routine 'SKEW_INIT'
Uploading routine 'MODE_BITS'
Uploading routine 'SKEW_NEAREND_SECOND'
Uploading routine 'MOTORS'
Uploading routine 'MMI_DISPLAY'
Uploading routine 'MEASURE_SPEED'
Uploading routine 'LUG_DRIVE'
Uploading routine 'INFEED'
Uploading routine 'HYD_HYD100'
Uploading routine 'BIT_SHIFT'
Uploading routine 'PRESSROLLS'
Uploading routine 'WIDTH_COUNTS'
Uploading routine 'MINIMUM_CUT'
Uploading routine 'MISC_ITEMS'
Uploading routine 'MMI_CALIB'
Uploading routine 'PREPOS_DN'
Uploading routine 'HYD_JOG'
Uploading routine 'OFFSETS'
Uploading routine 'MAIN_ROUTINE'
Uploading routine 'FETCHER_OVERRIDE'
Uploading routine 'WIDEST_EYE'
Uploading routine 'HYD_MAIN'
Uploading routine 'CHANGE_SAWS'
Uploading routine 'MMI_MSGDET'
Uploading routine 'FETCH_HOME'
Uploading routine 'OPTIMIZER_DATA'
Uploading routine 'CAL_FAIL'
Uploading routine 'EDGER_INIT'
Uploading routine 'GRAPH_GAP'
Uploading routine 'MMI_OVERRIDES'
Uploading routine 'MMI_STATUS'
Uploading routine 'RESAW_DIVERTER'
Uploading routine 'BOARDS_ONE'
Uploading routine 'NEXT_BOARD'
Uploading routine 'HYD_POSITION'
Uploading routine 'SKEW_FAREND_FIRST'
Uploading routine 'HYD_CONTROLS'
Uploading routine 'PREPOS_UP'
Uploading routine 'TARGET_SAWS'
Uploading routine 'SKEW_END'
Uploading routine 'HYD_CALIB'
Uploading routine 'ELECTROCAM'
Uploading all Modules...
Error: No port was found with the given port number.
Error: Failed to upload modules.
Complete - 2 error(s), 0 warning(s)
It will tell me that RSLogix is being taken offline, and thats it.
I did notice that the old program has the controller revision as 19.52, which is different than what's coming up when I try to do an upload to a new program.
Any ideas on the steps I should take? I can't take the machine offline during the day, but we may be able to do it tonight. Do you think it'll upload in Program mode?