defcon.klaxon
Lifetime Supporting Member
Hey guys,
I have a client that is running Lookout as their HMI, and they have ancient Scadapacks out in the field. They had me program a spare to replace one out in the field, but something odd is happening. Every time they try to change a setpoint, it reverts back to the old value after a few seconds. I'm planning a trip down there to take a look at what's going on, but was wondering if anyone had any ideas why this might be happening. When I check the comms statistics, the site has 100% success so it seems like comms are good and the program is executing. I can't really think of what else it could be, nothing else has changed. Any idea would be very helpful, thanks!
I have a client that is running Lookout as their HMI, and they have ancient Scadapacks out in the field. They had me program a spare to replace one out in the field, but something odd is happening. Every time they try to change a setpoint, it reverts back to the old value after a few seconds. I'm planning a trip down there to take a look at what's going on, but was wondering if anyone had any ideas why this might be happening. When I check the comms statistics, the site has 100% success so it seems like comms are good and the program is executing. I can't really think of what else it could be, nothing else has changed. Any idea would be very helpful, thanks!