Andreik
Member
Hi good day,
I am about to encounter installing a Proface GP477R-EG41-24VP. I've never encountered this brand before and I'm supposed to do it in 1 day. I'm more proficient with Omron HMI's. However, the problem really is simple. There is a machine installed with it is a Mitsubishi PLC then connected to it is this Proface GP477R-EG41-24VP (old). The task is to replace this old Proface HMI by a new unit but same model of HMI GP477R-EG41-24VP (new).
The task is really simple. All I have to do is to upload the old program from the old HMI and download/transfer it to the new one. In order to achieve success, I want to ask people who have been familiar with Proface to give me some pointers about this task. Any help will be very much appreciated.
Items to be used:
1. Programming Cable (GPW-CB03)
2. Software (GPPRO-CNT01W-P03)
3. Switching Power supply model S-50-24
Thank you very much,
Andrei K.
Philippines
I am about to encounter installing a Proface GP477R-EG41-24VP. I've never encountered this brand before and I'm supposed to do it in 1 day. I'm more proficient with Omron HMI's. However, the problem really is simple. There is a machine installed with it is a Mitsubishi PLC then connected to it is this Proface GP477R-EG41-24VP (old). The task is to replace this old Proface HMI by a new unit but same model of HMI GP477R-EG41-24VP (new).
The task is really simple. All I have to do is to upload the old program from the old HMI and download/transfer it to the new one. In order to achieve success, I want to ask people who have been familiar with Proface to give me some pointers about this task. Any help will be very much appreciated.
Items to be used:
1. Programming Cable (GPW-CB03)
2. Software (GPPRO-CNT01W-P03)
3. Switching Power supply model S-50-24
Thank you very much,
Andrei K.
Philippines