alive15
Member
Good afternoon to all.
I am running a 1769-L27ERM-QBFC1B with version 30.11 of Studio Logix 5000. I have issues with an ONS bit I have created. I have multiple parallel inputs that all tie into 1 ONS bit, which in turn, enables my output. However, about 40% of the time, the output does not come on? I am 100% positive I am resetting all inputs to off before turning any inputs back on in order to re-trigger the ONS bit.
My work around is using a pulse timer to keep on re-triggering the ONS bit until it turns my output on, but I am not sure why it will not work without the pulse timer.
What to do to troubleshoot this? I've attached my rung in the picture below.
Thanks!
I am running a 1769-L27ERM-QBFC1B with version 30.11 of Studio Logix 5000. I have issues with an ONS bit I have created. I have multiple parallel inputs that all tie into 1 ONS bit, which in turn, enables my output. However, about 40% of the time, the output does not come on? I am 100% positive I am resetting all inputs to off before turning any inputs back on in order to re-trigger the ONS bit.
My work around is using a pulse timer to keep on re-triggering the ONS bit until it turns my output on, but I am not sure why it will not work without the pulse timer.
What to do to troubleshoot this? I've attached my rung in the picture below.
Thanks!