Help Please

Home heating system: they have been working fine since the dawn of the modern age without PLCs... all you need is a thermostat.

Wastewater system: whatever brand has the best local support, because if your system is down waiting for support from across the country, you can’t tell people to stop pooping for a week...
 
Or, double-duty answer to both questions:

The one you can program to work flawlessly to not (freeze a house / shutdown the city sewer system)
 
Home heating: An Allen Bradley MaxiLogix 1970-L212 with the double column compensatory and the quad-syncro digital outputs.

Water/Waste water: Another Allen Bradly, the FuzzyLogix 3214-S1422 and depending on the area of the world you might want to add the reverse polarity thermo-stator flange boot (just to be on the safe side).
 
Home heating: An Allen Bradley MaxiLogix 1970-L212 with the double column compensatory and the quad-syncro digital outputs.

Water/Waste water: Another Allen Bradly, the FuzzyLogix 3214-S1422 and depending on the area of the world you might want to add the reverse polarity thermo-stator flange boot (just to be on the safe side).

:geek:🍻

I was also going to suggest the median earth tilt erector corrector, that little blue module.
 
you can’t tell people to stop pooping for a week.

During our regional deep freeze the pump-out boats couldn't operate safely, and often they couldn't access iced-up waste tank receptacles on deck, and the local pump-out station froze solid.

We didn't stop pooping for a week. But I have a new favorite bucket.
 

Similar Topics

Hello, I am trying to get a Yokogawa Hart pressure Transmitter and a Rosemount Temp Transmitter to read on a 1769-IF4 module on an L33ERM...
Replies
10
Views
375
Please help me, I have solve many week but still not solve it. I found trouble of factory talk studio when I set tag by browse address of OPC...
Replies
0
Views
117
Hello Everyone, i Have im my Industry a Endress & Hauser Promag400 this has a screen that constantly have that error, it says to wait, somebody...
Replies
2
Views
475
After replacing the 70 with the 525, the PLC can read from the drive and recognizes it as online, but no commands are being listened to. PLC is...
Replies
1
Views
551
Back
Top Bottom