Need help on Microsol RTU

raul_vaze

Member
R
Join Date
Feb 2008
Location
mumbai
Posts
87
We have a Compact Logix station whose serial port ( configured as DH-485) is connected to NET-AIC , and the other port is connected to Microsol RTU on Modbus( I was told by persons on site). Microsol RTU is transferring the data over IEC protocol , Now i have to make changes in the RTU as many analog signals are to be added. I have never worked on Microsol RTU so my question are as follows..


. Does any model of Microsol RTU support Modbus on one Port and IEC protocol on other ??

. How to configure the Microsol RTU ??

. Any programming software involved ?? Is it free

Please help me ..as i am very badly stuck here
 

Similar Topics

A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
2
Views
171
adam 1432
A
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
168
TheCaptain2000
T
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
125
kreamsippycup
K
D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
11
Views
414
drbitboy
drbitboy
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
11
Views
257
MHEDIREKIK
M
Back
Top Bottom