Acopos 1045

Dear CapinWinky, Please help me, how to run the drive manually with out PLC programming like standard VFD..
I have problem with ACOPOS 1090, RED LED steady, as soon as the PLC gives the enable signal, the main 24V DC supply breaker trips...
 

Similar Topics

Hello all, i am new to the servo drive and this brand also. i installed the automation studio v4.12. i have to configure drive with plc B and R...
Replies
0
Views
347
4 Acopos 1045 drives have gone belly-up in the past 2 years. They all display error 7200-DC buss overvoltage and error 7210-DC charging buss...
Replies
0
Views
2,395
good day all, i have a problem with my drive. the machine will operate for about 15mins and a fault 39018 comes up. can anyone tell me wat that...
Replies
0
Views
3,098
Hello, I'm trying to test Acopos multi using Automation Studio. Ready LED is green blinking, how can i know what error of Acopos on Automation...
Replies
1
Views
97
hi goodday to all, i have acopos 1320 as below title my acopos not driven a servo motor,. please help me,.
Replies
0
Views
406
Back
Top Bottom