hi all,
is it possible to move the decimal place in numeric display on panel view 800.
the PLC is SLC500.
im trying to read a pressure, when SCP for an example i get 87 which is 8.7 bar but on the HMI it only lets me add a decimal.
any help would be great.
is it possible to move the decimal place in numeric display on panel view 800.
the PLC is SLC500.
im trying to read a pressure, when SCP for an example i get 87 which is 8.7 bar but on the HMI it only lets me add a decimal.
any help would be great.