locotumbler
Member
I have a MicroLogix 1200 (1762-L40BWA). Is there an add on card I can get to hook up an HMI that will not eat up the programming port on the controller or an HMI that will allow for Through programming?
i've only ever dealt with Horner AIO HMI's and IDEC HMI to IDEC PLC. I know the IDEC's by default are open to through programming.
Thank you in advance.
i've only ever dealt with Horner AIO HMI's and IDEC HMI to IDEC PLC. I know the IDEC's by default are open to through programming.
Thank you in advance.