RBergmann
Member
I know there are a great number of members to this site from "down under". Perhaps one of you can help me.
My company is preparing a piece of equipment that is shipping to Australia. We are well versed in UL508A standards but want to make sure we meet those of Australia. My questions are:
1. Does Australia follow CE or other standards?
2. Will they accept UL508A?
3. Are there wire color standards that we should be aware?
4. I understand that the standard low voltage is 240VAC/1ph/50Hz. Correct?
5. High voltage standard. I understand this would be 480V/3ph. Correct?
Thanks in advance.
My company is preparing a piece of equipment that is shipping to Australia. We are well versed in UL508A standards but want to make sure we meet those of Australia. My questions are:
1. Does Australia follow CE or other standards?
2. Will they accept UL508A?
3. Are there wire color standards that we should be aware?
4. I understand that the standard low voltage is 240VAC/1ph/50Hz. Correct?
5. High voltage standard. I understand this would be 480V/3ph. Correct?
Thanks in advance.