vmlourenco
Member
Hello, someone have an example of an comunication between an Omron CJ2M CPU33 with FINS TCP to PC? Thanks for help
Omron CJ2M CPU33 with FINS TCP to PC example program
- Thread starter vmlourenco
- Start date
Take a look at AdvancedHMI.
This is open-sourced and written in VB.Net. It supports FINS over Ethernet for the Omron Controllers as just one of the drivers.
https://www.advancedhmi.com/index.php?main_page=page&id=14&chapter=0
I hope this helps you out.
Regards,
This is open-sourced and written in VB.Net. It supports FINS over Ethernet for the Omron Controllers as just one of the drivers.
https://www.advancedhmi.com/index.php?main_page=page&id=14&chapter=0
I hope this helps you out.
Regards,
Similar Topics
Hello
Someone know an Function Block or example code for Fins TCP/IP or UDP working for CJ2M CPU33?
Thanks for help
Hello
Its possible to comunicate with an Omron PLC CJ2M CPU33 over TCP/IP with an PC software to test this connection, like SocketTester or...
Hi every1, hope all going well. I recently joined this website and this is my first post here. So actually i have a PLC OMRON make SYSMAC Model...
When looking at instructions from help, instruction reference,CJ/CS. I see flags area. how can i tell what these are?
Like in BCNT.
Top Says...
is it possible? I have only a red led on the err/alam part of the cpu(cj2m-cpu33) and no other lights on and nothing on the 7-segment display...