CNC Mill - Ultra 100 fault

badamczyk

Member
Join Date
Dec 2013
Location
Warsaw
Posts
3
Hi,

im trying to build wood-mill cnc. I have 3 ULTRA 100 controllers, N-3412-2-H00AA and Motherboard CNC - SSK-MB2

I connected this set to PC and when i run it under Mach3 software (demo).

Problem is that when i change rotation direction, receive fault on ULtra 100 : "master encoder fault state"
One direction is OK, change = error.

Any suggestions ?

Sorry for my pure English.

regards
Bartek

P.S. Under "Ultra Master" software error doesn't appear.
 

Similar Topics

Hello, I'm looking for advice. First of all I am new to the world of PLC's. I am getting involved into machines and PLC's for fun. I have a...
Replies
4
Views
9,030
I have a CNC cutting equipment, all the components are Fanuc from the CNC CPU A02B-0307-B822, a PLC AIF01A and a panel i, on the panel i (operator...
Replies
1
Views
52
I'm looking at building an XY CNC, mainly as a learning exercise. I have a spare Beckhoff CX8090, which is TwinCat 2 only. There are some TwinCat...
Replies
1
Views
1,914
We have some large horizontal machining centers for drilling castings. They have custom built hydraulic clamps in the stations. We've had issues...
Replies
34
Views
14,180
Has anyone had any experience with this. Have a meeting next week with a vendor and trying to find out more info on my own. Just dont fully rely...
Replies
1
Views
1,316
Back
Top Bottom