Dear SIEMENS S5 Experts,
I am wondering if any of you have had experience with CP525 (or CP524) installed with 944B (or 943B) CPU and its IF1 connected to a dot matrix printer using the active TTY module. I need to create an S5 program for 943B/944B CPU which would enable the CP525/CP524 card to output certain text to a printer.
To my understanding that there are 2 parts needed:
1) the CP 525/CP524 module needs to be programmed using the COM525 and PROM525 software
2) the S5 PLC program itself that calls FB244 SEND with some parameters to transmit data from the CPU to CP and then to the printer.
Do you know if there are any additional parts (steps/details) needed to achieve my goal?
In fact, I have a copy of the EPROM from the CP525 card which has a program with
Interpreter
, Procedure
and 1 Job
.
What I need is any help (links, screenshots, even partial .S5D files) on how to write the S5 PLC side of the code. Can someone give me a hint, please?
Please help! Thanks a lot in advance.
AK5fa
PS. I have looked at the CP525/CP524/COM525 manuals (vol. 1 and 2) at the SIEMENS Support site, but I wasn't able to figure out the proper procedure...
I am wondering if any of you have had experience with CP525 (or CP524) installed with 944B (or 943B) CPU and its IF1 connected to a dot matrix printer using the active TTY module. I need to create an S5 program for 943B/944B CPU which would enable the CP525/CP524 card to output certain text to a printer.
To my understanding that there are 2 parts needed:
1) the CP 525/CP524 module needs to be programmed using the COM525 and PROM525 software
2) the S5 PLC program itself that calls FB244 SEND with some parameters to transmit data from the CPU to CP and then to the printer.
Do you know if there are any additional parts (steps/details) needed to achieve my goal?
In fact, I have a copy of the EPROM from the CP525 card which has a program with
Interpreter
Code:
I-S5D0000 07
Code:
P-S5D0000 07
Code:
SEND
What I need is any help (links, screenshots, even partial .S5D files) on how to write the S5 PLC side of the code. Can someone give me a hint, please?
Please help! Thanks a lot in advance.
AK5fa
PS. I have looked at the CP525/CP524/COM525 manuals (vol. 1 and 2) at the SIEMENS Support site, but I wasn't able to figure out the proper procedure...