PLC5 Conversion to Logix - PID Question

robbo

Lifetime Supporting Member
R
Join Date
Nov 2005
Location
Australia
Posts
85
HI fella's,

Need some help & guidance here or if there is a technote available? (I couldnt find one in the knowledge base)

Just wanting to know how to fill in the boxes so the maths works the same?

Any help would be great!!

Thanks.

PLC5 version : n12:0 in plc5 data type is PID

attachment.php




Logix 5000 version

attachment.php


attachment.php


PLC5_1.jpg PLC5_2.jpg plc5_3.jpg
 
Last edited:

Similar Topics

mylespetro
PLC5 to Logix conversion - Double indirect addressing
Hey everyone, Just used the PLC5/Logix migration utility to convert a program, and while addressing the PCEs, I noticed a lot of errors for "XIC...
Replies
12
Views
1,962
mylespetro
mylespetro
mylespetro
PLC5 to Logix conversion - FAL addressing
Hey everyone, Just a question regarding the conversion of FAL element addressing between a PLC-5 and Logix5000-series processor. In the...
Replies
3
Views
1,615
mylespetro
mylespetro
U
PLC5 SFC to Logix Conversion
I have a box erecting machine that uses a PLC5/20 and SFC currently. I need to convert the equipment to run in its new home which will be...
Replies
0
Views
1,334
uminded
U
RonJohn
PLC5 adaptor mode conversion to Logix
I have experience with converting PLC5 to Logix but this system has two PLC5s, one of which is used in adaptor mode. I'm wondering if someone...
Replies
5
Views
2,510
RonJohn
RonJohn
B
PLC5-Contrologix Indexed bit conversion
Hello, I am doing a PLC5 to 1756 L81 conversion. I have an issue with what looks like an indexed array bit in the PLC 5 that I am unsure of how...
Replies
1
Views
1,272
TheWaterboy
TheWaterboy
Back
Top Bottom