blawrenz
Member
I read a couple of threads in regards to this module and have questions about this module and since I cannot seem to find the documentation on the Modicon website I thought I would ask some questions here.
I have configured the module in the Traffic Cop for a Type E thermocouple to read in Degrees F, with no decimal place. I am using ProWORX 32 version 2.0 programming software. The input addresses for this module are set to 30010 through 30019.
1. What will I see at address 30010? (ie 0-4095 or the actual temperature value??)
2. What happens if I map address 30010 to address 40100? My assumption is that if I set the address to no decimal place in the Traffic Cop then the value in address 30010 is an integer value that can be directly mapped to address 40100, is this correct??
Thanks for the help!!
Brad L.
I have configured the module in the Traffic Cop for a Type E thermocouple to read in Degrees F, with no decimal place. I am using ProWORX 32 version 2.0 programming software. The input addresses for this module are set to 30010 through 30019.
1. What will I see at address 30010? (ie 0-4095 or the actual temperature value??)
2. What happens if I map address 30010 to address 40100? My assumption is that if I set the address to no decimal place in the Traffic Cop then the value in address 30010 is an integer value that can be directly mapped to address 40100, is this correct??
Thanks for the help!!
Brad L.