Jim Davie
Member
Have 9 SLC 5/04s on DH+ comms connecting to 2 Intellution Fix nodes (Full SCADA and view).PLCs use MSG blocks to pass a reasonable amount of data (they all have something to say to each other basically). Comms falls over on a regular basis neccesitating a reset of all the processors to kick them back in. They all have SVC comms statements in their code and run at 57.6K, they used to run at 230.4K but the issue was still there.
Is ther something I can do now to solve the problem ?
I also thought of upgrading to 5/05s and installing a small LAN in place of the DH+ network. A reasonable investment but one we're willing to make if it solves the problem.
Is ther something I can do now to solve the problem ?
I also thought of upgrading to 5/05s and installing a small LAN in place of the DH+ network. A reasonable investment but one we're willing to make if it solves the problem.