s7-1500 PLC and SICK microScan3 core PN

Riis82

Member
R
Join Date
Jan 2018
Location
Farre
Posts
2
Hi all

I've been assigned a project, with a SICK s300 microScan Core PN and 3 S3000 Advanced PROFINet IO laserscanners

I found a project from Siemens with a S3000 Advanced PROFINet IO configuration and function blocks.

The two types of scanners have very different process images, which leads me to think, that I can't use the function blocks from the S3000 to the s300.

Anybody have some experience with these two types of scanners?

Thanks for your time :)
 

Similar Topics

U
What ports / protocol do I need to open to remotely access a TIA Portal 1500 PLC?
Hi all Trying to remotely connect to a TIA Portal PLC. I can ping it without a problem but can't get my software to connect. I've opened port...
Replies
8
Views
313
uptown47
U
R
Write Data to Siemens (1500) PLC
Looking for options to write data to Siemens PLC. Looking for something closest to way we were doing it with AB PLC and excel sheet. Old way...
Replies
7
Views
886
Rfolkes
R
M
conection between PLC 1500 and OPC
Regards IP PLC: 192.168.0.1 6ES7 511-TK01-0AB0 using Tia Portal v17. IP OPC 192.168.0.3 It was verified that PLC and OPC are in the same network...
Replies
1
Views
760
cardosocea
C
C
Is it possible to notify events from PLC to PC? (Siemens S7 Tp1500)
Hello. I am a very begginer about PLCs, and I would like to know if it is possible the following case. I have a S7 PLC and a TP1500 touchscreen...
Replies
8
Views
2,793
drbitboy
drbitboy
A
Schneider m340 plc to siemens s71500
I need to establish communication between Schneider M340 and S7-1500 PLC. I am using gateway converter for MODBUS TCP TO PROFINET protocol...
Replies
12
Views
2,949
automationtalk
A
Back
Top Bottom