How to crate a ladder dia. temp. comparator

mane_arvind

Member
Join Date
Apr 2007
Location
mumbai
Posts
2
How to crate a ladder dia .



To compare the temperature with the reference temp.



1. input temp. from RTD



2. Reference temperature. 150 deg cel.



3. if temp. is less than the 150 deg cel. 'GREEN' light indicate.



3. if temp. is more than the 150 deg cel. 'RED' light indicate.

 

Similar Topics

What is the best way to make an online program change with structured ladder without stopping the operation of the PLC using GX Works 2?
Replies
1
Views
98
Dear all, I don't know why setup of password became challenging and weird. After setting up the password and try to upload the ladder from the plc...
Replies
3
Views
96
Good morning crew! Ok my logic works but I am missing something. When the start button is pushed it should like the red light for 4sec then shut...
Replies
13
Views
349
Got a repaired laptop back from warranty and loaded it up with all my software, unfortunately with my version V32.03 Studio 5000 I cannot change...
Replies
3
Views
168
I have a program that does a 7 second "scan" sensor calibration routine whenever a setting (setting is called assistance level or "AL" and ranges...
Replies
3
Views
174
Back
Top Bottom