I'm looking for knowledgeable advice.
We're experienced PLC programmers, and have had a quick problem thrown at us. I've never used a Modicon 984 before. There's an existing 984 PLC that has a dryer sequence programmed, but I'd call it partially programmed, all manual valve changes. We'd like to automate it, and expected to use a DRUM timer to do it.
I bought Proworx NxT, full version, since that's what the previous (not available) person used. It does not support DRUM !? We've heard that there is a loadable feature drum.usl, or something, that can add this feature. Is it available somewhere? What's the cost? Free?
Other clever suggestions?
Allen
We're experienced PLC programmers, and have had a quick problem thrown at us. I've never used a Modicon 984 before. There's an existing 984 PLC that has a dryer sequence programmed, but I'd call it partially programmed, all manual valve changes. We'd like to automate it, and expected to use a DRUM timer to do it.
I bought Proworx NxT, full version, since that's what the previous (not available) person used. It does not support DRUM !? We've heard that there is a loadable feature drum.usl, or something, that can add this feature. Is it available somewhere? What's the cost? Free?
Other clever suggestions?
Allen