boomer1 Member B Join Date May 2005 Posts 2 May 14, 2005 #1 I Was Making Some Program Modifications Using 90-30 Machine Edition For The First Time. Well My Problem Is When I Did This The Rung On The Right Side Pulled Out On Several Rungs. I Donot Know What I Did To Cause This Problem. Any Help On This? Boomer1
I Was Making Some Program Modifications Using 90-30 Machine Edition For The First Time. Well My Problem Is When I Did This The Rung On The Right Side Pulled Out On Several Rungs. I Donot Know What I Did To Cause This Problem. Any Help On This? Boomer1
Steve Bailey Lifetime Supporting Member + Moderator Join Date Apr 2002 Location The boondocks of Western Massachusetts USA Posts 8,589 May 14, 2005 #2 You probably have ME set to normalize coils to the tenth column, but the original programmer set it up to put coils wherever they were placed. Go to the 'fX Options' tab in the navigator window if you want to change whether or not to normalize coils to a specific column. Last edited: May 14, 2005
You probably have ME set to normalize coils to the tenth column, but the original programmer set it up to put coils wherever they were placed. Go to the 'fX Options' tab in the navigator window if you want to change whether or not to normalize coils to a specific column.
boomer1 Member OP B Join Date May 2005 Posts 2 May 15, 2005 #3 Ge Problems Thanks Steve I Will Try What You Suggested Tommoror When I Go In. Thanks Again Bryan