Tonho.Beltran
Member
Have a Good Day,
Normally I'm use FactoryTalk View Software, especially in Server-Client Configuration. But in this case I had to repair a datalog of RSView32 version 7.5 and I replace a file and the project back to normal.
But, according to the customer, before the problem, the system lets close main window and the datalog continues operating (as background). Now this functionality not happen and immediately they close the window, the system stops data logs.
My Question is:
Is there any way to configure the RSView32 to close the main window (Works) and the project remains running in the background?
Thanks!!!
Normally I'm use FactoryTalk View Software, especially in Server-Client Configuration. But in this case I had to repair a datalog of RSView32 version 7.5 and I replace a file and the project back to normal.
But, according to the customer, before the problem, the system lets close main window and the datalog continues operating (as background). Now this functionality not happen and immediately they close the window, the system stops data logs.
My Question is:
Is there any way to configure the RSView32 to close the main window (Works) and the project remains running in the background?
Thanks!!!