Variblade Member V Join Date Jun 2003 Location California Posts 6 Jun 14, 2003 #1 I am using up/down counters for some position control. I would like to be able to change the value of the counter to 25 when a limit switch is activated. Anyone have any ideas on how this can be done?
I am using up/down counters for some position control. I would like to be able to change the value of the counter to 25 when a limit switch is activated. Anyone have any ideas on how this can be done?
rogerhollingsworth Member Join Date Nov 2002 Location Southern Ohio. Posts 385 Jun 14, 2003 #2 In using A-B plc instructions you could use a MOV instruction and move 25 into the counter ACC. or PRE. Last edited: Jun 14, 2003
In using A-B plc instructions you could use a MOV instruction and move 25 into the counter ACC. or PRE.