Hi All,
Thanks for the help, but I'm still scratching my head...
Joel, I don't know if I can send MSG commands to the printer or not. My printer already has the proper firmware to work with AB Ethernet/IP comms. I tried the example and I didn't get a printout. I assumed the only thing in the example I had to change was the IP address (192.168.1.206?port=9100) and the EWEB_Path ($01$00). I change them as required and toggled test bit and nothing printed. I'm wondering if it's because of the firmware change on this unit. Unless I missing something, please advise.
Widelto,
I need some assistance using the raw parser method. My label uses FN1-FN3 and then I used FN6-FN23. So I need an easy (Lol) way to load data in the raw parser tag and send out as one. My tags are typically Reals and DINTs, so I assume first I need to convert to a string then insert them between ^FN6^FD and ^FS. Do you have a sample code that you have to load the data into the parser tags (if that's what you did)? Thanks for all the help.