putiss
Member
Hi all,
I'm solving problem with 1214C cpu and too small free work memory (about 4%]. Solution will be rewrite user program to smaller or change cpu.
But my question is - does anybody experience with small free work memory and consequencies?
This cpu sometimes lost plc-hmi communication and other io-devices, after power reset ok. Could be due to memory problem?
Thanks in advance
I'm solving problem with 1214C cpu and too small free work memory (about 4%]. Solution will be rewrite user program to smaller or change cpu.
But my question is - does anybody experience with small free work memory and consequencies?
This cpu sometimes lost plc-hmi communication and other io-devices, after power reset ok. Could be due to memory problem?
Thanks in advance