Old Terminal Block Identification

asvenarchick

Member
A
Join Date
May 2015
Location
california
Posts
2
I'm having a hard time finding the manufacturer of the terminal blocks shown in the picture below. They're very similar to the AB 1492-CA terminals but not exactly. Does anyone have an idea?

Untitled.png


https://ibb.co/VJ2mwvt
 

Similar Topics

E
Siemens OP7 OLD Hmi Terminal
Hi Guys, Hoping we still have some Siemens Old hardware Gurus on here. We are trying to support one of our long time customers. Who have obtained...
Replies
4
Views
897
sigmadelta
S
B
OLD IPC620-30 and HP Vectra Engineering terminal
I have a blending plant based on the Honeywell IPC620-30 which is programmmed with IPC620-60 software resident on the old HP Vectra ES15. However...
Replies
0
Views
1,425
bethelkjari
B
C
Explorer rendering glitch in old FactoryTalk View ME
This is admittedly a pretty obscure problem, but maybe someone else has run into it, or at least something similar. For reasons I won't get into...
Replies
3
Views
103
Operaghost
Operaghost
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
228
LMDAVE
L
C
Update old Parker TS80xx HMIs to use Crimson programs?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
87
CageFreeBMW
C
Back
Top Bottom