Hello,
Looking to add another BL67-RFID-S card to an existing rack.
The current setup is as follows.
BL67-GW-EM
Slot 1 BL67-2RFID-S
Slot 2 BL67-2RFID-S
Slot 3 BL67-2RFID-S
Slot 4 BL67-2RFID-S
Slot 5 BL67-2RFID-S
I can connect to the built in web interface. I have connected with Turck Service Tool and with PACTWare. With Turck Service Tool I can see the IP address and clicking there just opens the web interface. With PACTWare connected to the network I can see all 35 of the TBEN-L1_16DXXP modules but neither of the BL67 racks. Just about anything I find online goes over setting up the network comms but no mention of adding a module.
Any help in pointing me in the right direction is greatly appreciated.
The rest of the system consist of a 1756-L74 v28.011
Looking to add another BL67-RFID-S card to an existing rack.
The current setup is as follows.
BL67-GW-EM
Slot 1 BL67-2RFID-S
Slot 2 BL67-2RFID-S
Slot 3 BL67-2RFID-S
Slot 4 BL67-2RFID-S
Slot 5 BL67-2RFID-S
I can connect to the built in web interface. I have connected with Turck Service Tool and with PACTWare. With Turck Service Tool I can see the IP address and clicking there just opens the web interface. With PACTWare connected to the network I can see all 35 of the TBEN-L1_16DXXP modules but neither of the BL67 racks. Just about anything I find online goes over setting up the network comms but no mention of adding a module.
Any help in pointing me in the right direction is greatly appreciated.
The rest of the system consist of a 1756-L74 v28.011