ControlSysNick
Lifetime Supporting Member
I'm wondering if anyone here is running FactoryTalk View ME version 10 and has tried importing old 32 bit HMI project archive files, say going back to version 5.1?
I have some old PanelViews I have to modify the programs on and don't have a working 32 bit Windows laptop to export and then convert the database to a 64 bit version. Apparently, with version 10, you don't need to use a 32 bit version of the software in the first step of this conversion as the 64 bit version 10 can do the conversion itself.
I'd appreciate some feedback from someone who may have done this - did it work and were you then able to modify the file and create an updated 5.1 run-time for the older PanelView?
Nick
I have some old PanelViews I have to modify the programs on and don't have a working 32 bit Windows laptop to export and then convert the database to a 64 bit version. Apparently, with version 10, you don't need to use a 32 bit version of the software in the first step of this conversion as the 64 bit version 10 can do the conversion itself.
I'd appreciate some feedback from someone who may have done this - did it work and were you then able to modify the file and create an updated 5.1 run-time for the older PanelView?
Nick