I have a 5 wire euro that need to be connected to an rs485 but I don’t have one I was wondering if I can use a rs422 if so how will I connect the 3 wires to the rs422. I have an external power supply for the equipment already(12VDC) the 5 euro wire are as follow
1) +10 thrue 30V dc input
2) rs485/d1/B/+
3)dc common (GND)
4) rs485/do/A/-
5) comms gnd
The rs422 has 5 connection where the three wire can go, which are as follow
Tx+
Tx-
Gnd
Rcv+
Rcv-
How can I connect it if I can work and would I need a special drive beside the one I usually use for the rs422
Thanks for your help!!!
1) +10 thrue 30V dc input
2) rs485/d1/B/+
3)dc common (GND)
4) rs485/do/A/-
5) comms gnd
The rs422 has 5 connection where the three wire can go, which are as follow
Tx+
Tx-
Gnd
Rcv+
Rcv-
How can I connect it if I can work and would I need a special drive beside the one I usually use for the rs422
Thanks for your help!!!