TimD
Lifetime Supporting Member
Hello,
I have a flowmeter capable of producing up to 250,000 pulses per minute, and am wondering if I can use this meter with my PLC.
Is a 100 khz pulse channel 100,000 pulses per second, 6,000,000 pulses per minute? If yes, then I assume my flowmeter is correct.
All I can ascertain from the controller Reference Manual, is that I have 100 khz per channel 6 total pulse inputs.
Any help is appreciated,
Tim
I have a flowmeter capable of producing up to 250,000 pulses per minute, and am wondering if I can use this meter with my PLC.
Is a 100 khz pulse channel 100,000 pulses per second, 6,000,000 pulses per minute? If yes, then I assume my flowmeter is correct.
All I can ascertain from the controller Reference Manual, is that I have 100 khz per channel 6 total pulse inputs.
Any help is appreciated,
Tim
Last edited: