Hi
I am trying to configure the cp343-1 IT so I can access it through a web browser. I have sucessfully transfered data betwen two cp units using a crossover ethernet cable and everything is working correctly. ie data is been sent from one cp unit and read by the other one. However if I type in the IP address in the browser address bar eg http://140.80.0.1/index.htm,
I cannot see the default web page. has anyone any advice or step by step instructions or things I should be checking?
Thanks for any advice, tips or suggestions given.
Ed
PS Ethernet crossover cable pluged into laptop computer.
I am trying to configure the cp343-1 IT so I can access it through a web browser. I have sucessfully transfered data betwen two cp units using a crossover ethernet cable and everything is working correctly. ie data is been sent from one cp unit and read by the other one. However if I type in the IP address in the browser address bar eg http://140.80.0.1/index.htm,
I cannot see the default web page. has anyone any advice or step by step instructions or things I should be checking?
Thanks for any advice, tips or suggestions given.
Ed
PS Ethernet crossover cable pluged into laptop computer.