try to connect PLC via intouch wonderware

b_e33

Member
Join Date
Mar 2013
Location
lolo
Posts
59
i have plc that connect via eternet ... the plc program is rslogix 5000
i have a connection between the plc and rslogix 5000
but from intouch wonderware the tags are not connected ..
need help...
i confiured my plc from SMC but stell not work
 
Which driver are you using in WonderWare? How do you have it configured? Can you ping the PLC from the WonderWare computer? What are the IP addresses?

So far you haven't given us nearly enough information to be able to help diagnose anything...
 

Similar Topics

I have a Panelview C300 a Micro 830 PLC and also the Connected Components Workbench Even though the CCW seems like it was made to create a...
Replies
9
Views
4,740
Hi everybody, I have about three Red Lion HMI's, the calibration on the screens seems correct but where I'm using the pop up keypad to enter...
Replies
1
Views
90
Hello, So i managed to read the string coming from control logix and put a string display in PanelView 800. Now I am struggling to do the other...
Replies
1
Views
115
I'm running into a problem when trying to use the RSLinx Backup Restore Utility where it throws an error when it tries to restore a backup. The...
Replies
6
Views
453
Hello colleagues Anybody knows, what could be the best or a better option to bring with you when you are in service at factory to connect via...
Replies
1
Views
242
Back
Top Bottom