You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Unread November 15th, 2011, 04:30 AM   #31

mahdisan is offline
Join Date: Jan 2008
Location: saveh
Posts: 9
Hello, Please share Motrona MC700 motion control rotary shear firmware. (CT701.04)
  Reply With Quote
Unread November 15th, 2011, 07:21 AM   #32
Clay B.
Lifetime Supporting Member
United States

Clay B. is offline
Clay B.'s Avatar
Join Date: Jun 2005
Location: Concord,NC
Posts: 1,304
Originally Posted by Steve Bailey View Post
I agree with the assessment that you are getting about as much performance as you can expect out of your PLC. Consider this: At 80 meters/minute, the web is traveling at 1.3 mm/millisecond. If your PLC scan time is 10 milliseconds, the web is moving 13.33 mm each PLC scan. Once per scan is the fastest you can update any commands the PLC sends to the drive. That's why you need a dedicated motion controller.

Does your system simply try to maintain the knife speed at a ratio to the web speed or do you vary the ratio so as to match the blade speed to the web speed while the knife makes the cut? If the latter, is the knife motor large enough to provide the torque required to accelerate the knife cylinder at the higher web speed?
Got the same results you did. Also when you take into account that the scan is not synchronized with your process a more accurate expected error would be +/- 26.66 mm.
  Reply With Quote
Unread July 12th, 2019, 01:56 AM   #33
Viet Nam

ngovanbinh is offline
Join Date: Jul 2016
Location: HCM
Posts: 1
Dear mahdisan
Could you send me the program PLC?
Thank you.
  Reply With Quote
Unread July 12th, 2019, 01:55 PM   #34

Jonnie_R is offline
Join Date: Feb 2012
Location: Brecon
Posts: 189
Originally Posted by ngovanbinh View Post
Dear mahdisan
Could you send me the program PLC?
Thank you.

I'd be surprised if you get anything on an eight year old thread, other than your email spammed.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
Feed Forward control - checking my solution Doug_Adam LIVE PLC Questions And Answers 2 October 4th, 2007 11:50 PM
PLC on an Anilam M1400 CNC Control talibozek LIVE PLC Questions And Answers 6 March 31st, 2005 12:52 PM
how often should I trigger the PID? Ron Beaufort LIVE PLC Questions And Answers 11 February 22nd, 2003 10:57 AM
grounding power sources drewcrew6 LIVE PLC Questions And Answers 18 December 12th, 2002 05:16 PM
Rotary Knife Application mazmach LIVE PLC Questions And Answers 1 November 4th, 2002 04:30 PM

All times are GMT -5. The time now is 02:16 PM.