HMI Communication problem

Hi

I'm simulating a display in FT ME using RSLogix Emulate 500. outputs in RSLogix 500 are activated immediately, but in the HMI are delayed about 2 seconds. communication I'm using is OPC SERVER as shown in the following video:
http://www.youtube.com/watch?v=8qnBSoR7ko4&feature=channel_video_title

to be this time delay in FT ME?

Remember that the update rate is set *per display* in FTView Studio and the default is 1 second.

Select the Display Properties and speed up the update rate.

Thanks for your answer