Hi guys,
We've come across a project to construct a test jig for pulling test on an object. There is a hydraulic pump to do the pulling (length) & in between the hyraulic shaft and the object there is a load cell to measure the pressure/force.
As the hyraulic shaft retract, the distance between the shaft and the object (stationary), will be increase. So, as the distance increase, the pressure (reading from load cell), will also be increase.
The operation of the test jig (start/stop) will be control by a PLC and a workstation running SCADA software.
The test result will be ploted in a graph Distance Vs Pressure.
My question is, I've normally come across graph (Trend - RSView32/ME) only plot distance or Pressure AGAINST time. How can I create a graph that plot Distance AGAINST Pressure?
Note: All the values for shaft distance & load cell reading will be send to PLC using 4-20mA.
Anyone come across this please advise. Thank you.
We've come across a project to construct a test jig for pulling test on an object. There is a hydraulic pump to do the pulling (length) & in between the hyraulic shaft and the object there is a load cell to measure the pressure/force.
As the hyraulic shaft retract, the distance between the shaft and the object (stationary), will be increase. So, as the distance increase, the pressure (reading from load cell), will also be increase.
The operation of the test jig (start/stop) will be control by a PLC and a workstation running SCADA software.
The test result will be ploted in a graph Distance Vs Pressure.
My question is, I've normally come across graph (Trend - RSView32/ME) only plot distance or Pressure AGAINST time. How can I create a graph that plot Distance AGAINST Pressure?
Note: All the values for shaft distance & load cell reading will be send to PLC using 4-20mA.
Anyone come across this please advise. Thank you.