Quote
A "Stuck" Runtime error is detected on I/O module 3
Un-Quote
In a System comprising: SLC 5/01 CPU / 16 Input DC Sink / 8 Output Relay / Analogue Output, Modules (1 of each in that order)
We get the above fault, also noted:
Major Error Halt S:1/13 Flag=1, (all other flags=0)
This fault has been occuring on the PLC for the last 3 years about once every 2 month. We connect RSLogix, clear the fault. Then the machine is running again.
With regard to making a permanent repair can anyone advise the cause or where I should be looking?
thanks
micgent
A "Stuck" Runtime error is detected on I/O module 3
Un-Quote
In a System comprising: SLC 5/01 CPU / 16 Input DC Sink / 8 Output Relay / Analogue Output, Modules (1 of each in that order)
We get the above fault, also noted:
Major Error Halt S:1/13 Flag=1, (all other flags=0)
This fault has been occuring on the PLC for the last 3 years about once every 2 month. We connect RSLogix, clear the fault. Then the machine is running again.
With regard to making a permanent repair can anyone advise the cause or where I should be looking?
thanks
micgent
Last edited: