LG Glofa PLC
- Thread starter JeffKiper
- Start date
OkiePC
Lifetime Supporting Member
We used a few LSIS branded drives and their folks tried to sell us on their PLCs, but we didn't bite. I think they claimed to have good tech support out of Chicago.
http://www.lsis.com/product/depth2.aspx?d1=CCC&d2=001&d3=003
I wanna say their latest software was a free download, so it might be found in that link.
EDIT: software link:
http://www.lsis.com/support/download/detail.aspx?c=3085&t=6&l=&p=&d1=CCC&d2=001&d3=003&qt=&q=&e=&n=1
http://www.lsis.com/product/depth2.aspx?d1=CCC&d2=001&d3=003
I wanna say their latest software was a free download, so it might be found in that link.
EDIT: software link:
http://www.lsis.com/support/download/detail.aspx?c=3085&t=6&l=&p=&d1=CCC&d2=001&d3=003&qt=&q=&e=&n=1
Last edited:
Similar Topics
Hi all,
I wanna Connect Glofa G7m LS PLC to WinCC Flex
i have no Serial port in my laptop so i use USB to serial converter and...
Dear all
Please guide me to use modbus communication by using LS PLC Glofa GM4 series, i haven't the guide book for modbus (GM4C series).
Thanks...
Hi all,
Recently I have been to one site where they are running GOLFA G7M PLC. I tried to upload the project from the PLC with the free...
Hi,
I have GLOFA G7M PLC, I need to copy the program from it to another PLC,
I start GMWIN then Project>Upload Project from PLC, then it asks...
I am working on a GLOFA GM4-CPUA ver2.8 PLC and I have in my PC GMWIN 4.06 software running on WINDOWS XP OS. I physically connected the PC to the...