SMOKE
Member
I am putting a barcode scanner on a computer running FT View SE.
When I scan a barcode I want it to always fill a string display in SE.
I have used scanners before but always with an SST or PCM card, so the data was always in registers in the PLC. This is my first scanner to HMI to PLC. The scanner will put the data in the field if the field is highlighted I need to point the scanner to the field.
Thanks for any help.
When I scan a barcode I want it to always fill a string display in SE.
I have used scanners before but always with an SST or PCM card, so the data was always in registers in the PLC. This is my first scanner to HMI to PLC. The scanner will put the data in the field if the field is highlighted I need to point the scanner to the field.
Thanks for any help.