Position Loop Bandwidth Rockwell Kinetix 5700

I believe the bandwidth value is the -3dB point on the frequency response plot of whichever loop you are dealing with. It would be related to but not the same as the loop update rate.

Keith
 

Similar Topics

H
Studio5000 - Multiply based on position in array.
I have an array of 55 REAL values. Is there a way to multiply based on the array location ? I have 55 transfer belts that are equally spaced...
Replies
3
Views
153
HoldenC
H
R
Hydraulic ram position / pressure control
Hi All, I could do with some advice on a hydraulic control system. It is necessary for me to accurately position a vertical hydraulic ram with...
2 3
Replies
34
Views
1,905
Peter Nachtwey
Peter Nachtwey
J
Rs500 sqo hold position after stop and restart
Hello I am trying to make a program work with a sqo instruction .The process has 5 steps ,and a starting step of zero.There should be 8 sec...
2
Replies
17
Views
1,050
drbitboy
drbitboy
K
ISA 5.1 Refresher - Analog Position Feedback (P&ID Tag)
It's been a long time since I've had to think of P&ID tag nomenclature myself (and not gone along with some scheme devised by someone else). I've...
Replies
1
Views
235
g.mccormick
G
B
Best Practice - What controls recommended for a 2-position turntable
Out of interest, I'd like some thoughts on what would be considered best practice with regards to a 2-position turntable control scheme (see...
2
Replies
17
Views
1,135
Peter Nachtwey
Peter Nachtwey
Back
Top Bottom