TimeSelector Codesys

boneless

Lifetime Supporting Member + Moderator
Join Date
Feb 2008
Location
OKC
Posts
1,627
Hi all,

Running into a little issue I don't understand.

I have a historical trend in CodeSYS (running on an R-PI). It works pretty good as long as I am showing everything.

When I use the TimeSelector to select a time frame, I am getting weird results. Attached pictures will explain it better than I can in words.

Also, when I add a time to the selector (offline), for example 12h and hit enter, it will change my input to 6h. When I enter 6h, it changes it to 0h. Anybody got any idea?

SS1.jpg SS2.jpg SS3.jpg SS4.jpg
 
What happens if you select the same time period (6/26 to 6/30) as for the SS1.jpg "Everything" picture?

For the SS2 - SS4 pictures, it appears that no data had been recorded at that time for day 7/1 and later.

That is it for me, out of here.
 
Last edited:
lines are drawn between 2 datapoints, so if no point the line will be horizontal.
check if datapoint stamps are correct , the data are taken every sample period.
 
Thanks all, I will have to check it out.

It is just weird to me it works fine if I only use the scroll thingy on the bottom, I can zoom and move. Just thinking the time selector should (in my head) set the width of my zoom.
 
it is an extra utility, however not perfect, i try to stay within iec61131, making my own graphics to be able to use them anywhere
 

Similar Topics

Hello, I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Replies
1
Views
72
Hi everyone, as this is my first experience with Rockwell Software i would like to know what's the best way to make Enumerations?
Replies
10
Views
412
I am trying to get Codesys to work with a couple of Moxa ioLogik E1200 series DIO devices (E1210 and E1211). I am able to write to the E1211 DOs...
Replies
2
Views
113
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...
Replies
39
Views
2,060
Hello to all, Is it possible to export Codesys symbols to .txt, .csv or .xml in a similar manner like exporting symbol table in STEP 7? For...
Replies
0
Views
102
Back
Top Bottom