I am looking at a Small Boil-off Tank (5' High) rectangular, and need to do some level measurement. The current tank has an opening at the top, so looking at options i could use with that unless i have to put some connections on the side.
It's some run-off water from wood drying so it foams quite a bit. I am hoping for a 4-20ma signal, so i can do a slow boil-off of rapid based on the water coming out.
Capactive and Radar are out as they won't eliminate foam. Any suggestions of something you might have used with some practical pricing.
It's some run-off water from wood drying so it foams quite a bit. I am hoping for a 4-20ma signal, so i can do a slow boil-off of rapid based on the water coming out.
Capactive and Radar are out as they won't eliminate foam. Any suggestions of something you might have used with some practical pricing.