Analog module error

Join Date
Jul 2018
Location
marietta ms
Posts
1
Delta DVP60ES2 08XN2 06XA-E2

I have analog module Error
red led error flashing
green led A-D flashing

24v in are good on analog and plc
i unplug A-D reboot still same error
i changed the whole 06XA-E2 out for a brand new one reboot still same error

idk where to go from here
 

Similar Topics

Hi all, I have a CompactLogix system in the field that had been running without any issues for several months, until one of the 1769-IF8 modules...
Replies
1
Views
7,378
Hello, I'm trying to add the 1756-TI16 analog module to my backplane using Studio 5000 and I'm getting a memory error all the time and totally...
Replies
3
Views
1,562
Hello! I am using schnidler PLC M340 and Unity Pro S,My program is running well and no error but I/O LED's on Ethernet and analog input module is...
Replies
7
Views
3,135
Hi all, I am:shock: using Delta PLC DVP28SV with analog module DVP06XA-S. As soon as I power on the PLC I am getting error signal in the analog...
Replies
13
Views
3,954
Hi friends; I purchased a new analog module ALG 223. I connect the transmitter 0 to 87 PSIG. Set the configration as follows low=0000 high=32000...
Replies
2
Views
1,527
Back
Top Bottom