ShaunCroman
Member
Hi
Has anyone had any luck with reading the 64bit Modbus register 3204 (kWh) from a Schneider iem 3000 series meter over Modbus IP to either an OPC server or Citect SCADA?
I managed to get round the PM5100 by utilising the Float32 register- this is not available on the 3000 series.
any suggestions are much appreciated
regards
Has anyone had any luck with reading the 64bit Modbus register 3204 (kWh) from a Schneider iem 3000 series meter over Modbus IP to either an OPC server or Citect SCADA?
I managed to get round the PM5100 by utilising the Float32 register- this is not available on the 3000 series.
any suggestions are much appreciated
regards