Communicate with plc mitsubishi fx series

thiba007

Member
Join Date
Jul 2011
Location
KUALA LUMPUR
Posts
11
Dear all,

I got once issue where by i need to monitor a Auto Hoist that use
Mitsubishi FX2N Series. My problem is to do ONLINE MONITOR the PLC
since the hoist is moving Forward & Reverse after pick the parts.

Is there any wireless communication device from Mitsubishi maker.

Please advise on this.🤞🏻
 
Something like this should work :
http://www.usconverters.com/rs232-serial-wifi-adapter

FX2N programming port is a serial RS422 port.
The converter lets transmit the serial data through the Ethernet/WiFi network.
Installing the virtual COM software in the PC you can connect the programming software to that virtual port as if it were a real port.

Probably there are also other cheaper adapters Made in China ...
 

Similar Topics

Hi men! I need know, which HMI i can use with PLC Mitsubishi series A ?? factorylink ?? intouch ?? indusoft ?? CitectScada ?? Elipse ?? i have...
Replies
0
Views
6,183
I have created a program that collects counter valves and assigns a date time stamp to the counter value using the real time clock. This...
Replies
6
Views
6,990
Hello i have a PV+1000 firmware ver 5.10 and a compact logix L18ERM VER 24. I googled and read many posts but still can not make simple button on...
Replies
1
Views
524
Have matched communication parameters of both, DOPSOFT HMI and PLC Fatek. Yet an error keeps appearing "Failed to open port COM1". I believe...
Replies
0
Views
657
Dear Members, Currently, I'm working with Hitect HMI spec PWS6600S-S and PLC FATEK PLC FBS-32MAR2-AC. We plan to do a replacement unit...
Replies
0
Views
730
Back
Top Bottom