Jim G. Member J Join Date Nov 2007 Location Georgia Posts 187 Feb 28, 2018 #1 Does messaging work between a SLC500 and AD DL06 plc? I want to be able to monitor some outputs from the SLC500 and use them as inputs to the DL06.
Does messaging work between a SLC500 and AD DL06 plc? I want to be able to monitor some outputs from the SLC500 and use them as inputs to the DL06.
gclshortt Member Join Date Dec 2014 Location Ontario Posts 3,217 Feb 28, 2018 #2 The only way is to use another device to communicate to each of the units. You could use something like the C-More Micro HMI Panel. https://cdn.automationdirect.com/static/specs/ea3t4cl.pdf Regards,
The only way is to use another device to communicate to each of the units. You could use something like the C-More Micro HMI Panel. https://cdn.automationdirect.com/static/specs/ea3t4cl.pdf Regards,
Archie Member A Join Date May 2002 Location Orangeburg, SC Posts 1,944 Feb 28, 2018 #3 Which SLC500? Is it one with an RS232 port? One possible method that may work, but would be a real pain, is by sending ASCII data from the SLC by setting up the RS232 port in user mode, then receiving the ASCII data in the DL06 and parsing it.
Which SLC500? Is it one with an RS232 port? One possible method that may work, but would be a real pain, is by sending ASCII data from the SLC by setting up the RS232 port in user mode, then receiving the ASCII data in the DL06 and parsing it.