KA24DE
Member
- Join Date
- Oct 2003
- Posts
- 21
I have a Panel View 550 kepad and touch running on DH-485 thru the RS-232 port. It losses communication with the netowrk at random. I have it communicating with a Micrologix 1500 and every once in a while i will see the message "no active nodes found on network". In RSLinx, it will be there and then all of a sudden, it has the red X over it. I have tried diffrent programs in both the PLC and the panel view but i am still getting this error. Can anyone offer any suggestions as to what might be wrong, any help would be appreciated
Thank You...
Thank You...