nilesh_1106
Member
Hi..
I am using Micrologix 1400 PLC & C600 HMI. I want to do the communication between them by DH-485 via RS485 port.( As distance between them is 40 meters apart )
I already set the Channel 0 of micrologix 1400 to DH-485 and also I have 1763-nc01 cable. but I don't know about c600 RS485-port connection & setting for the same.
So kindly help me out for this problem..
I am using Micrologix 1400 PLC & C600 HMI. I want to do the communication between them by DH-485 via RS485 port.( As distance between them is 40 meters apart )
I already set the Channel 0 of micrologix 1400 to DH-485 and also I have 1763-nc01 cable. but I don't know about c600 RS485-port connection & setting for the same.
So kindly help me out for this problem..